pto gearbox

two) Loosen the bolts only when fitting the shafts. DO NOT take away the bolts fully. aluminium-multiplier-ep700-series.html]#If removed they could fall into the housing and cause a failure. The box must be disassembled to retrieve the bolts if this takes place.

1) Tighten bolts to stay away from oil leaking in the course of procedure. (The bolts have a seal underneath their heads.)

Take treatment when tightening the four x locking bolts inside of the housing. These bolts correct the removable splined shafts in spot.

Notice: When fitting splined shafts.

Click on drawing to enlarge.

1:1.85 velocity increaser with thirteen/four”Z20 splined output shaft.

For the current information concerning pto gearbox, visit https://www.ever-power.net/product/hydraulic-pto-drive-gearbox-spped-increaser/.