Product features
One strand sprocket with 1 group of teeth around the circumference for applications where a single chain may support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one side to accommodate numerous kinds of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding in order to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket has a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It really is a Type B sprocket with a hub projection encircling the bore using one side, and both the hub and bore possess Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings depending on the diameter of the shaft. One’s teeth of the sprocket help prevent slipping and binding in order to avoid power loss in assemblies. It meets International Business for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket can be ideal for use in a wide range of applications regarding light to moderate loads and ongoing, high-cycle functions, including vehicle transmission systems, building and agricultural tools, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced tooth ringing its circumference. The length from the peak of 1 tooth to another is named the pitch, and is commonly measured in 1/8-in . increments. The sprocket transfers power and motion by a roller chain that is threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch stops the chain from slipping so that no power can be lost. In the heart of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is certainly often suited to the sprocket’s hub to custom made-match the sprocket onto a shaft to hold it firmly set up. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs using one side are Type B, and sprockets without hubs are Type A sprockets. For applications requiring sprockets to end up being swapped onto shafts of different diameters, a sprocket with a bore large enough to match all shafts may be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad selection of applications where the drive power of an engine must be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining gear, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmitting manufactures a variety of chains, sprockets, and other power transmission components that meet International Business for Standardization (ISO) criteria for quality assurance. The business, founded in 1917, is usually headquartered in Wheeling, IL.