All EPT shaft collars, including Clamping Shaft Collars Quick-clamping collars, are solitary point faced to make sure perpendicularity and proper alignment. This critical manufacturing step assures specific shaft collar deal with to bore relationship leading to correct aspect positioning on the shaft and even pressure on interfaced ingredients.
Quick-clamping shaft collars from EPT are manufactured from high quality aluminium with type-II sulfuric anodized finishes, with a dark finish upon the collar and a gold finish on the clamping lever for added visibility. Aluminum collars are corrosion resistant, lighter than different metals, have low inertia and also have non-magnetic properties. All EPT items will be RoHS and REACH compliant. Available regular sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is made from black oxide steel. This is a two-piece clamping shaft collar for applications needing a more powerful holding power and higher axial load ability than setscrew or one-part clamping collars. The two-piece design separates into two halves, allowing set up or repositioning anywhere on the shaft without disturbing existing ingredients. It accommodates a greater selection of shaft diameters than setscrew collars and is effective on both hard and gentle shafts. It is made of steel for weldability and rust resistance with a black oxide end for a ornamental appearance and resistance to white corrosion, chipping and flaking, and stick-slide of the screw during torqueing, increasing the collar’s grip on the shaft. Dark oxide also provides gentle corrosion resistance and improved lubricity. This collar includes forged socket-head cap screws for securing the collar onto the shaft. The operating temperatures because of this collar range between -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is well suited for use in various applications, which includes in the auto industry to situate pieces in automobile power steering assemblies, the production industry to locate pieces on a conveyor belt system, and the hobby craft industry to hold tires on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on / off the shaft with no need to eliminate other ancillary factors. Clamps firmly in place once tightened to the shaft. Ideal for positioning components such as bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly set up when tightened to the shaft. Perfect for positioning pieces such as bearings or sprockets onto shafts.
The dual split shaft collar made of steel browned (clamp collar) is simple to attach. The shaft collars usually do not damage the shaft. Also, they are insensitive to exterior forces and vibrations and distribute the retaining forces evenly over the entire shaft circumference.
Clamp-style and collection screw shaft collars from Grainger could be indispensable to power transmission. They are able to keep bearings and sprockets on shafts, situate pieces in motor and gearbox assemblies and serve as mechanical stops. A two-part clamping shaft collar can simply wrap around a difficult or gentle shaft without marring. Collection screw collars use a cup stage socket placed screw to lock onto a very soft or predrilled shaft.
The collar clamping mechanism works quickly and effectively with simple side opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a good fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In situations where higher holding power is normally or clamp 
axial load is necessary, the quick-clamping collar isn’t the recommended choice. EPT offers a comprehensive type of industry-leading one-part and two-piece shaft collars designed for these applications.