Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control switch is still installed however the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Application Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. electric fan motor china Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). If you order several electric motor at a time, we can do our better to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan program. This is a completely enclosed fan electric engine and made to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric powered motor will overheat and get into automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric electric motor is produced in China.