Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still installed however the cord itself is generally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “Program Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft 
is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of Electric Fan Motor switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). In the event that you order several engine at a time, we will do our best to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan program. This is a completely enclosed fan electric electric motor and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electrical electric motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.