We are focused on research and development of items that meet up with the increasingly sophisticated electronics industry and are trusted in computers, home appliances, consumer electronics, communications, details, industry, medical and other fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor and it is leading the world’s exceptional design.
Ever-Power provides products which are smaller, lighter, more electric power efficient, and easier to use.
We selling products all over the world and obtain the certifications for every of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet up with the latest regulations.
Gear adapters install between the vehicle tranny and power take-away, and will serve several purposes. Most commonly, adapters are employed to change the route of rotation of the PTO output shaft. They may also be used to space the PTO out and away from the 
transmission case. On some imported or non-SAE regular transmissions they allow for the mounting of normal 6-bolt electric power take-offs. Gear Adapters can be found to match most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to boost clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Matches PTO rotation compared to that of the driven equipment
Standard and nonstandard bolt patterns: Suits SAE regular PTOs to nonstandard transmissions
• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP from the power remove)
• No need to modify electric power take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with motor, hydraulic hoses and toned faced couplers
• Ideal for three point electrical power take off tools – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches provide a safe means to protect operators and high-priced machinery from circumstances when the inertia of PTO motivated apply exceeds and over-operates the tractor PTO speed. When this happens, the over-jogging coupler will free-wheel
smoothly and securely. Over-jogging clutches will normally resist applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or drive line angularity will reduce this capability
If the length of your PTO does not fit properly within a tractor, a PTO adapter can extend the size and never have to replace it for a new one. This adapter has an overall length of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the end of your PTO. This tractor PTO shaft adapter possesses both a female 6 spline end and a male 6 spline end, each end has a diameter of 1-3/8 in. This allows more connection alternatives and is ideal for anyone that owns an older tractor since the older parts may not be produced any longer and so are less common.
The over-running coupler can be an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run traveling source. The coupler drives solidly from tractor to put into practice and free wheels smoothly when implement exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or 3 Point Hitch package for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It really is conveniently carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.