rotary cutter gearbox

rotary cutter gearbox
Alternative Rotary Cutter gearbox, 40hp rated, one-3/8″-six spline enter shaft, 1.57″ X twelve tapered spline output shaft and one:1.forty seven pace up ratio.
These gearboxes have a sq. housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes.
These are authentic tools gearboxes
This gearbox will not suit the IM400, IM500 and IM60 types as they have a sleek input shaft!
Examine with similar products

Alternative Rotary Cutter gearbox, 40hp rated, one-3/8″-six spline enter shaft, 1.fifty seven” X twelve tapered spline output shaft and one:one.47 pace up ratio. These gearboxes have a sq. housing configuration and are similar in mounting and ratio to the spherical configuration gearboxes. These are original equipment gearboxes on the IM402, IM502 and IM602 sequence rotary cutters which showcased slip clutch PTO shafts. This gearbox will not fit the IM400, IM500 and IM60 models as they have a easy enter shaft! If your gearbox has a twelve spline output shaft and a 1-three/8″ – 6 spline enter shaft this gearbox will function. Bolt pattern is four-3/4″ on centre gap to hole and six-3/4″ heart to centre of bolt hole on diagonal. The mounting holes kind a sq. bolt sample.

rotary cutter gearbox
RC-20 Series
Specs
Torque: 1,750 – 3,267 lb.-in.
198 – 369 Nm.
Ratios: 1:two.5, one:two.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.47 L)
Excess weight: 34 lbs. (15.four kg)
Purposes
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Sequence
RC-30 Series
Requirements
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: 1:one.47, 1:1.seventy one, 1:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Fat: 51 lbs. (23.one kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Series
Specifications
Torque: two,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, one:one.seventy one, 1:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Fat: 56 lbs. (25.four kg)
Apps
Rotary Cutters Rotary Slashers
Gears: Accessible with possibly straight bevel or spiral bevel gearing.
Electricity: Hp & Torque dependent on AGMA system for steady obligation additionally a support or load course factor.
Shafting: Various dimensional, metallurgical, and heat-take care of options available.
Bearings: Geardrives accessible with different bearing existence choices.
Lubrication: Drives offered with various lubes depending on functioning traits

Recent Posts