Equipment Packing containers For Rotary Cutter’s, Shredders, and Choppers
RC thirty Sequence Gearbox, 40hp Rated, one-three/eight” SB enter, 1-1/two” X twelve Spline Output. 1:one.47 Ratio Substitute your broken rotary cutter gearbox with this alternative device. Why rebuild when you can substitute at this kind of a reduced value? These gearboxes have been employed by Worksaver, HawkLine, International, WAC, Massive Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of more. Note: Actual Gearbox could have a rounded housing or sq. as shown, depending on current availability, all inside components are interchangeable and technical specs for both packing containers are equivalent! This gearbox attributes a 1:1.forty seven Velocity Up equipment ratio for use on 5′ and greater diameter rotary cutters. Sector normal 1-three/8″ clean diameter input shaft with one/two” shear bolt gap and retaining ring groove and one.57″ diameter twelve tapered spline output shaft permit fitment to most light-weight, common and medium obligation rotary cutters. Each gearbox characteristics large velocity ball bearing units and warmth dealt with gears and shafts to make certain lengthy daily life. Four bolt mounting matches market expectations. Every gearbox involves blade carrier mounting nut and cotter pin. Gearboxes are delivered dry and require sixteen ounces of eighty-90W gearlube or equal. Disclaimer: Any and all Original Products Manufacturer’s (OEM) tradenames, emblems, drawings, hues, descriptive info and component figures are employed for elements identification needs only, and DN Gear, LLC (DN) is in no way implying that any particular elements are OEM elements. More, any use of the OEM’s tradenames, trademarks, drawings or component quantities by DN is designed only to assist DN’s clients, in obtaining the suitable DN part or component which will replace the OEM’s part.
rotary cutter gearbox