Our worm equipment reducers offer a choice of a solid or hollow result shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other decrease gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s quickness reducer products – has been serving industry reliably for over 40 years. Its proven modular design has set the sector standard for performance and may be the most imitated item in today’s worm gear acceleration reducer market. But why settle for a knock-off when you’re able to have the original – from EP Gear.
11 basic one reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
Right angle gearboxes (worm and planetary) are durable and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor efficiency is important. Contact our technical sales staff for help determining which gearbox answer is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and invite for a corner convert with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The proper angle bevel gearbox combines the features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our right angle planetary gearboxes provide a robust solution. The right angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our swiftness reducers. These gearboxes are made to deal with varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest performance and best output torque of most our swiftness reducers. These gearboxes are made to deal with varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the best choice for constant duty applications. Their gear cluster design provides a highly effective method for dissipating high temperature. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options so they work well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in replacement solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, velocity reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement in which a equipment in the form of a screw, also referred to as a worm, meshes with a worm equipment. These gears are typically made from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm gear reducers is that they produce an output that’s 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to change the direction of the result, a left-hand thread worm gearbox is required.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Articles concerning Worm Reduction Gearbox are offered on our site.