Merchandise Description

300kg ribbon mixer dry powder mixing device washing detergent powder mixing equipment

Solution introduction:
The ribbon blades are typically manufactured of double or triple levels.All the layer are installed on 1 solitary horizontal axis,the inner levels and outer layers are undertaking opposite rotation during mixing procedure.The content kind avortex in the movement during these 2 movement to velocity up the mixing velocity and boost the uniformity.

Solution Complex parameter:

Solution Attributes:
one. It is a multifunctional mixing products with stable procedure,reliable top quality,lower noise,long service life,simple installation and maintenance,and a assortment of spiral blade constructions.

2. The mixing speed is rapidly and the mixing uniformity is high.A scraper can be mounted on the ribbon blade,which has a good mixing impact on viscous supplies.

3. According to the mixing requiremengs of different resources (particular materials need to be cleaned every single time they are blended),diverse spiral blade stuctures can be used,andheating and drying function can be presented for buyers to pick.

four. The easy mixing method reduces the hurt to fragile resources.Custom-made spiral blade structure is available for specific components.

five. A cleansing doorway can also be opened on the horizontal device entire body for customers to thoroughly clean.The general height of the equipment is low,simple to install.

Product Specifics:

Distinct major shaft agitators can be geared up in accordance to the houses of uncooked materials.
The primary shaft agitator could be: interior and outer ribbon, paddle and ribbon, disconnected ribbon, and shaver-formed agitator.

Choices for motor: common motors, explosion-evidence motors, variable frequency motor, higher effectiveness and strength conserving motor. Commonly used reducers: R-collection, K-collection, and F-series gear box cycloidal reducer, universal equipment reducer, planetary equipment reducer.Generally motor-gearbox relationship: immediate relationship, pulley relationship, hydraulic coupler connection.

A single crucial to start off the mixing, can established the time to quit routinely

no accumulation of content and no lifeless ends for the duration of mixing.
The manual or pneumatic discharge port can be manufactured

Purposes:
This is ribbon blender mixer equipment, fit for mixing dry powder product like milk powder, dry spice
powder, seasoning powder, fertilizer powder, protein powder and many others device is stainless steel
and comply to foods safety quality.

Firm details:
Our manufacturing facility was proven in 1997, with 8 production traces and covering an area of twelve,000 sq. meters. It has produced into a professional maker of cosmetics machinery and gear, by integrating R&D, production, income and services. Innovative creation equipments are the guarantee for substantial good quality goods.
Obtaining designed for twenty five years, our business has constructed up solid strength to provide first-course services for each and every new and previous customers.Apart from, our devices are in rigorous conformity with GMP specifications, possessing CE certification presently and receiving numerous customers’ have faith in and recognition.

Our certifications:

Cooperation with foreign customers:

FAQ:
Q1: Are you a factory or buying and selling organization?
 A1:We have our own manufacturing facility and skilled staff, prosperous knowledgeable R&D and expert provider team.
Q2:How does your factory do concerning high quality management?
 A2:Our good quality is created on very good good quality materials, imported from Japan, Germany and so on. We have handed ISO9001,CE, GMP. Our price tag is based on the good quality, and we will give reasonable charges to each client.
Q3: How about the Product Selection?
 A3:We can provide a wide range of products for your A single-cease sourcing. Also we can customize according to your specific
requirements.
This fall:How about the following service?
 A4:We can give you 1 years after product sales guarantee, we can also ship our engineer to you manufacturing facility to set up this equipment and
teach your workers, but the Consumer must pay the round air ticket value and set up the hotel accommodation as properly as the means for Seller’s engineer. We will send some totally free set of spare areas for you modify it.
 Q5: What’s the ensure if we purchase from you?
 A5: All the equipment requested will give 1 calendar year assure from the shipping day .
Q6: What production lins you make?
A6: 1. Paste and cream creation line
       2. Liquid washing production line
       3. Fragrance manufacturing line
       4. Lipstick manufacturing line
       5. Aerosol generation line
       6. Basis manufacturing line
       7. Toothpaste manufacturing line
       8. Rest room cleaning soap manufacturing line

HangZhou JUTAO Machinery Tools CO., LTD
Insert: 1st floor Developing C, Xihu (West Lake) Dis. lake inventive industrial park, No.8 Xihu (West Lake) Dis. street, Xiamao, Xihu (West Lake) Dis. district, HangZhou China. 
 

###

###

###

###

###

###

###

###

###

###

How to Use a Cyclone Gearbox

Often, a cycloidal gearbox is used in order to achieve a torque transfer from a motor or pump. This type of gearbox is often a common choice as it has a number of advantages over a regular gearbox. Its main advantage is that it is easy to make, which means that it can be incorporated into a variety of applications. However, if you want to use a cycloidal gearbox, there are a few things that you need to know. These include the operation principle, the structure and the dynamic and inertial effects that come with it.

Dynamic and inertial effects

Several studies have been carried out on the static and dynamic properties of cycloidal gears. The study of these effects is beneficial in assisting optimal design of cycloidal speed reducers.
In this paper, the dynamic and inertial effects of a two-stage cycloidal speed reducer have been investigated using the CZPT program package. Moreover, a new model for cycloidal reducers based on non-linear contact dynamics has been developed. The new model aims to predict several operational conditions.
The normal excitation contact force for the cycloid discs of the first and second stage is very similar. However, the total deformation at the contact point is different. This effect is mainly due to the system’s own oscillations. The cycloid discs of the second stage turn around the ring gear roller with a 180deg angle. This angle is a significant contributor to the torque loads. The total excitation force on the cycloid discs of first and second stage is 1848 N and 2068.7 N, respectively.
In order to analyze the contact stress, different gear profiles were investigated. The mesh density was considered as an important design criterion. It was found that a bigger hole reduces the material content of the cycloidal disc and results in more stresses.
Moreover, it is possible to reduce the contact forces in a more efficient manner by changing the geometric parameters. This can be done by mesh refinement along the disc width. The cycloidal disc has the greatest influence on the output results.
The efficiency of a cycloidal drive increases with the increase in load. The efficiency of a cycloidal reducer also depends on the eccentricity of the input shaft and the cycloidal plate. The efficiency curve for small loads is linear. However, for the larger loads, the efficiency curve becomes more non-linear. This is because the stiffness of the cycloid reducer increases as the load increases.

Structure

Despite the fact that it looks like a complicated engineering puzzle, the construction of a cycloidal gearbox is actually quite simple. The key elements are the base, the load plate and the thrust bearing. All these elements work together to create a stable, compact gearbox.
The base is a circular section with several cylindrical pins around its outer edge. The pins are fixed on a fixed ring that holds them in a circular path. The ring serves as a reference circle. The circle’s size is approximately 5mm in diameter.
The load plate is a series of threaded screw holes. These are arranged 15mm away from the center. These are used to anchor external structures. The load plate must be rotated around the X and Y axis.
The thrust bearing is placed on top of the load plate. The bearing is made of an internal diameter of 35mm and an external diameter of 52mm. It is used to allow rotation around the Z axis.
The cycloidal disc is the centerpiece of the cycloidal gearbox. The disc has holes for the pins that drive the output shaft. The holes are larger than those used in output roller pins. The disc also has a reduced eccentricity.
The pins are attached to the cycloidal disc by rolling pins. The pins are made of a material that provides mechanical support for the drive during high-torque situations. The pins have a 9mm external diameter. The disc has a number of lobes and is rotated by one lobe per shaft revolution.
The cycloidal gearbox also has a top cover that helps keep the components together. The cover has a pocket for tools. The top cover also has threads that screw into the casing.

Operation principle

Among many types of gear transmissions, cycloidal gearboxes are used in heavy machinery and multi-axis robots. They are highly effective, compact and capable of high ratios. In addition, they have an overload capability.
Cycloid disks are driven by eccentric shafts that rotate around fixed ring pins. Roller pins of the pin disc engage with holes in the cycloidal disc. These roller pins drive the pin disc and the pin disc transfers the motion to the output shaft.
Unlike conventional gear drives, cycloidal drives have low backlash and high torsional stiffness. They are ideally suited to heavy loads and all drive technologies. The lower mass and compact design of the cycloidal disk also contributes to its high efficiency and positioning accuracy.
The cycloidal disc plays a central role in the gearbox kinematics. It rotates around a fixed ring in a circle. When the disc is pushed against the ring gear, the pins engage with the disc and the roller pins rotate around the pins. This rotating motion generates vibration, which travels through the driven shafts.
Cycloid discs are typically designed with a short cycloid, so that the eccentricity is minimized. This reduces unbalance forces at high speeds. Ideally, the number of lobes on the cycloid is smaller than the number of surrounding pins. This reduces the amount of Hertzian contact stress.
Unlike planetary gears, cycloidal gears have high accuracy and are capable of withstanding shock loads. They also experience low friction and less wear on tooth flanks. They also have higher efficiency and load capacity.
Cycloid gears are generally more difficult to manufacture than involute gears. Cycloid gears are not suitable for stacking gear stages. They require extreme accuracy for manufacturing. However, their smaller size and low backlash, high torsional stiffness, and low vibration make them ideal for use in heavy machines.

Involute gear tooth profile

Almost all gears are manufactured with an involute gear tooth profile. Cycloid gears are also produced with this profile. Compared with involute gears, cycloid gears are stronger and can transmit more power. However, they can also be more difficult to manufacture. This makes them costlier.
The involute gear tooth profile is a smooth curve. It is derived from the involute curve of a circle. A tangent to the base circle is the normal at any point of an involute.
This curve has properties that allow the involute gear teeth to transfer motion in perpendicular direction. It is also the path traced by the end of the string unwrapping from a cylinder.
An involute profile has the advantage of being easy to manufacture. It also allows for smooth meshing despite misalignment of the centre distance. This profile is also preferred over a cycloid tooth profile, but it is not the best in every regard.
Cycloid gear teeth are also made of two curves. Unlike involute teeth, cycloid gear teeth have a consistent radius. Cycloid gears are less likely to produce noise. But they are also more expensive to manufacture.
Involute teeth are easier to manufacture because they have only one curve. Cycloid gears can also be made with a rack type cutter. This makes them cheaper to manufacture. However, they require an expert design. They can also be manufactured with a gear shaper that includes a pinion cutter.
The tooth profiles that satisfy the law of gear-tooth action are sometimes called conjugate profiles. The involute profile is the most common of these. It allows for constant torque transmission.

Backlash

Typically, cycloidal drives provide a high ratio of transmission with no backlash. This is because the cycloid disc is driven by an eccentric shaft. During rotation, the cycloid disc rotates around a fixed ring. This ring also rotates independently of the center of gravity.
The cycloid disc is typically shortened to reduce the eccentricity. This helps to minimize the unbalance forces that may occur at high speeds. The cycloid also offers a larger gear ratio than traditional gears. This provides a better positional accuracy.
Cycloid drives also have a high torsional stiffness. This provides greater torsional resilience and shock load capabilities. This is important for a number of reasons, such as in heavy-duty applications.
Cycloid drives also have lower mass. These benefits make them ideally suited for all drive technologies. The design also allows for higher torsional stiffness and service life. These drives also have a much smaller profile.
Cycloid drives are also used to reduce speed. Because of the high torsional stiffness of the cycloid, they also have high positioning accuracy.
Cycloid drives are well-suited to a variety of applications, including electric motors, generators, and pump motors. They are also highly resistant to shock loads, which is important in a variety of applications. This design is ideal for applications that require a large transmission ratio in a compact design.
Cycloid drives also have the advantage of minimizing the clearance between the mating components. This helps to eliminate interference and ensure a positive fit. This is particularly important in gearboxes. It also allows for the use of a load cell and potentiometer to determine the backlash of the gearbox.

editor by czh 2022-12-13