The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with a built-in limit switch system that’s suitable for assembly of a locally available electric engine. The Gearbox is used in manually-controlled or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is Gear motors for Greenhouse definitely rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminium precision housing. The self-braking worm wheel transmitting means that the drive shaft is usually 
locked when the decrease gearbox isn’t running. The completely sealed reduction gearbox has an expansion chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all conditions, even at high temperatures. Thanks to the use of an growth chamber, the Gearbox can be installed in any position. There are no limitations, because there is no need for a bleed plug. The sealed reduction gearbox keeps the gear essential oil of the Gearbox in ideal condition for its entire operating life time. The Gearbox is ideal for discontinuous use, operating course s3-30%, with a maximum activation time of 25 minutes.
THE APPARATUS box reduction gearbox comes with an FT85 motor assembly flange, on to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an integrated chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit switch system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).