The EP Greenhouse geared motor is a concise and lightweight reduction gear driver with a built-in limit switch system that is suitable for assembly of a locally available electric engine. The gear motor is used in manually-managed or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gearbox can be rainproof and windproof. The reducer has a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft can be locked when the decrease gearbox is not running. The completely sealed reduction gear driver comes with an growth chamber with a diaphragm to keep the gear oil at a low pressure under all conditions, even at high temperature ranges. Thanks to the use of an growth chamber, the gear driver can be installed in any position. There are no limitations, because there is no need for a bleed plug. The sealed reduction reducer keeps the apparatus essential oil of the reducer in optimal condition for its entire operating lifetime. The gear driver is ideal for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction reducer comes with an FT85 motor assembly flange, to which the right IEC standard motor can certainly be 
installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an integrated chamber and is certainly enclosed by an impact-resistant plastic cover. The limit change system is accessible and simple to adjust. The limit switch system’s optimum switching range is certainly 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The geared motor comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 moments.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).