“H” CLASS Refuse Drag Chains can be used for conveying sawdust,wood chips, pulp, garbage, tankage, ashes, and other abrasive spend through either wooden or metal troughs. Because of its huge, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable having capacity when managed at moderate speeds.
Leading face of every Leaf Chain barrel is flat, providing a broad area to push material along the trough and also to keep the chaim from riding over the top of the material. The rounded internal aspect of the barrel is carefully shaped to create excellent sprocket get in touch with. Sidebars are reinforced with wearing shoes which provide both
additional wearing surface area and stiffening for the hyperlink. A vertical member on each sidebar assures added link rigidity and shields the pin from harm.
“H”CLASS Refuse Drag Chain is available in EVRT-POWER Promal or Duramal with a tensile strength selection of 36,400 to 52,000 pounds. This rugged working chain comes in a pitch range of 5.000 to 8.000 inches. Each hyperlink is produced in accordance with manufacturer’s specifications and may end up being interchanged with links created by other chain producers. “H”CLASS Refuse Drag Chain is available in riveted construction just. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast steel, are recommended for”H” class Refuse Drag Chain operation. Links should be run in the direction of the 
closed barrel.
