WORM SERVO GEAR REDUCER
Wide variety of servo gearboxes, designed to fit almost all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, intended for the utmost torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The right technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo gear reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our range of Servo Reducers, now offering five levels of precision to meet up any application requirements. The five levels of precision obtainable allows a machine designer to select the required reducer precision to meet their requirements and their spending budget. They are available in both in-collection and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Common applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of motor couplings and installation flanges are available for the entire reducer range to mount virtually any servo engine and the hollow bore output can be utilized to attach output shafts, pinion shafts, or other drive components.
These reducers are typically selected based on the peak cycle forces, which often happen during accelerations and decelerations. These routine forces rely on the driven load, the speed vs. period profile for the routine, and any other external forces acting on the axis. For more selection details, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application info will be reviewed by our engineers, who will recommend the best solution for your application.
EP Inc. offers a full range of modular servo gearboxes /worm reducers. The modular design permits configurations with motor input flange and output pinion for rack and pinion drives, and also solid output shafts, Hollow bore output, and input shafts for all the positioning applications. The modular design allows for universal installation of the gearbox in virtually any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor package. As the gears are naturally angled, they result in a short total amount of the electric motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a simple and robust style, the series provides gearing ratios that range from 6:1 to 75:1. An individual may also customize the components through the order, so as to match the gear to its intended program.
The Precision Planetary Gears of the EPRG series contains a comprehensive range of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with dual shaft, right position shaft and right position output, in addition to a full selection of adapters for motor mounting, making them capable of meeting the requirements of also the most different applications. They are designed for make use of with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used in combination with other EP electric motor types. This range of products is based on years of experience and represents the outcome of a decade-long study targeted at improving performance.
Optimum precision and dynamics, coupled with excellent torque density, are the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for any program and any efficiency range. Our low-backlash planetary and right-position gearboxes reflect our enthusiasm for creativity and the best levels of precision.
Worm gear reducers provide market progress solution with performance and flexibility. Low quantity of basic models could be applied to an array of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical devices. When the motor swiftness needs to be reduced, the output torque boosts and send torque completely to the application. We believe that clients will appreciate our gear reducer to accomplish their demand. Just check out EP, you will get more information regarding servo gearheads, servo gearboxes, and equipment reducers. We continue to keep in the years ahead for your support.
Plug the Quickness Reducer in to the desired channel of your receiver, and plug the business lead from your servo (or servo wye) into the male servo lead coming from the circuit table. The established screw on the blue trim pot, located near the top of the main circuit board, is utilized to control the acceleration of the servo. Change the set screw fully clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for maximum speed reduction, or anywhere in between for partial speed reduction. The crimson LED indicates three feasible conditions: Gradual Blinking = No Transmission; Solid On = No Speed Decrease; Fast Blinking = Reduced Acceleration Setting
Please note that if you make any change to the speed environment as the receiver is on, you need to cycle capacity to the receiver (convert if off and back again on) for the new speed environment to take effect. This circuit can also be utilized in conjunction with this Servo Reverser to cause flap or retract servos to carefully turn in opposing directions for correct function. Instructions are included for easy set up and use.
IMPORTANT NOTE: This device will only focus on a regular, proportional servo. It will NOT work on a retract-type servo, as they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, also by a transmitter which includes this function, as their design and electronics don’t allow it. Verify the FAQ page to learn more.
This device will reduce the speed of any regular, proportional servo. Connect it in the middle of your receiver and the servo (or servos) you intend to control for a more scale-like movement of flaps or retracts. Adjustable, it can be set to reduce the rate of your servo from super-slow movement to no speed reduction at all, with an nearly infinite number of positions in between. Maximum reduction period for a servo to visit 90 degrees is about 14 seconds, minimum time (no reduction) is simply the normal rate of the servo. Ideal for reducing or getting rid of the tendency of a plane to “balloon up” when flaps are deployed. It can be used to control more than one servo by use of a regular servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as packaging machines, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, correct angle solid shaft, and right angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to very easily mount to any manufacturer’s servo motor. The EP Series helical gears possess slanted teeth compared to spur gears with straight cut teeth, generating a smoother equipment mesh, yielding considerably lower noise levels.
The low backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance elements.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, easy output shaft
PSKC = B5 output, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway
Any type of staying inquiries on servo gear reducer, discover more right here.