This standard selection of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. They were specifically developed for use with state-of-the-art servo motor technology, providing tight integration of the engine to the machine. Angular backlash of less than 1 arc-minutes is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and mounting flanges are available for assembly to virtually all servo motors, and the hollow bore result can be utilized to mount output shafts, pinion shafts, or other drive elements.
Usual applications for these reducers include precision rotary axis drives, traveling gantries 
& columns, material handling axis drives, zero-backlash axis drives and electronic line shafting. Industries offered include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque range of 92 Nm to 520 Nm. As angular drives they are especially space-saving and reduce the expenditure for valuable installation space.
The helical-worm servo gearmotors are designed in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors give you exceptional attenuation properties for the procedure of your systems with low degrees of vibration. This is certainly due to the longitudinal software of power on the input shaft. This allows torque impulses to become prevented successfully and for maximum results when it comes to running smoothness and sound reduction to be achieved.
Both the equipment unit, and the synchronous servomotor are based on our modular system. This enables you to have fully individual configuration possibilities for every application. One thing is certain – Our servo gearmotors are genuine specialists for very specific requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, velocity reducers, worm gear reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a equipment in the type of a screw, also known as a worm, meshes with a worm gear. These gears are typically made from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other gear reduction boxes. A principal benefit of worm equipment reducers is definitely that they generate an output that’s 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox has right hand threads; to change the direction of the output, a left-hand thread worm gearbox is required.
At times a motor’s capability could be limited to the stage where it needs gearing. As servo producers develop worm drive servo better motors that can muscles applications through more complicated moves and produce higher torques and speeds, these motors need gearheads add up to the task.